
Product Highlights
The XGS-PON SFP+ Stick ONU, also referred to as the "SFP+ encapsulated PON ONU module", is primarily used to replace SFU (Single Family Unit) optical modems. It facilitates 10-gigabit single-port optical-to-electrical conversion in XGS-PON networks.
This module fully meets the requirements for telecom-grade FTTB (Fiber to the Building), FTTH (Fiber to the Home), and FTTO (Fiber to the Office) equipment. It can be hot-plugged into a 10G SFP+ slot on an Ethernet switch, functioning as an ONU. This allows the entire device to directly connect to the XGS-PON optical network. The OLT (Optical Line Terminal) at the central office can register the XGS-PON SFP+ Stick ONU just like a regular ONU, enabling the transition from a P2P (Point-to-Point) network to a PON network.
-
XGS-PON High Performance Chipset
-
1x 10GbE High Speed SPF+ Interface
-
IPv4/IPv6 Dual Stack
-
With excellent interoperability, it supports major OLT brands.
Resources
Technical Specifications
Form Factor
-
SFP+
Wavelength
-
1270nm-TX/1577nm-RX
Connector
-
SC/UPC
Transmitter type
-
DFB
TX Power
-
4~9dBm
Receiver overload
-
>-8dBm
Class
-
N1
Power consumption
-
<2.1W
Application
-
FTTH, FTTC, FTTB, XGS- PON AccessNetwork, 10G Access Networks
Operating temperature
-
0~70°C (32~158°F)
Power supply
-
3.3V
Max transmission distance
-
20km
Data Rate
-
9.953G-TX/9.953G-RX
Media
-
SMF
Receiver type
-
APD
RX power
-
-28.5~-8dBm
Receiver Sensitivity
-
<-28.5dBm
Max Link Budget
-
29dB
Extinction ratio
-
6dB
Protocols
-
ITU-T G.9807.1, SFP+ MSA,
ITU-T G.988
DDM/DOM
-
Support
Certifications
-
FCC, CE




